S 663
DESCRIPTION
Type S 663 is recommended for medium application as a rod seal. Type S 663 has an asymmetric lips and is strictly designed as a rod seal. This means for example, overlap in the outer diameter in order to achieve tight fit in the groove. Thanks a special geometry of the inside diameter is achieved an excellent dynamic tightness and excellent properties of reverse-flow also in the rods with long stroke. Seal S 663 achieves excellent results in combination with double wiper rings such as types A 846 or A 839.
MATERIAL
HYTHANE® is a special plastic with excellent wear resistent, flexible and high thermal resistant.
It is characterized by:
- extremely good wear resistance
- very low permanent compressive deformation
- high flexibility
- great flexibility in a wide temperature range
ADVANTAGES
- excellent properties during the side displacement of rod
- low friction
- improved dynamic sealing properties
- easy assembly
RANGE OF USE
PERMANENT TEMPERATURE: * from -40 °C to +100 °C
PRESSURE: to 400 bar
SLIDING SPEED: to 1 m/s
These are related values above. Interdependencies are shown in the next table.
* For water and pressure liquids HFA and HFB is permissible maximal temperature +60 °C.
For pressure liquid HFC is permissible maximal temperature +40 °C.
MEDIA
Seals from HYTHANE® are suitable for applications with air, water, pressure liquids based on mineral oil.
Temperature range is limited for HFA, HFB and HFC liquids.
Operating conditions | ||
---|---|---|
Maximum pressure | ||
´v´max. | Temperature range | Temperature range |
m/s | -40 °C / +80 °C | -40 °C / +100 °C |
1 | 280 bar | 250 bar |
0.5 | 400 bar | 350 bar |
Number of products found: 27
- 10
- 50
- 100
- 1
- 2
- …
- 3
- Next
Load 10 more