Automatic battery lubricator type SKF TLSD
Lubricators SKF TLSD (SYSTEM 24) from the program SKF MaPro work on the electro-mechanical principle._x000D_
They replaced automatic lubricators type SKF LAGE. The production of SKF LAGE had been terminated. Only spare sets of SKF large are available. They consist of tank filled with lubricant and batteries. For more information click HERE._x000D_
It is possible to precisely set the clearance period of lubricators TLSD to 1, 2, 3, 4, 6, 8, 9, 10 and 12 months. _x000D_
The lubricator is designed for connection directly to a thread of the lubrication point, or it is possible to place a short line between lubricator output and the lubrication point (it is recommended the max. length 0,5 m, on condition d10 mm the inner diameter of the tube)._x000D_
The lubricators are supplied with reservoirs with capacity 125 and 250 ml pre-filled with greases and oils SKF (available in wide range). This reservoir is single-shot (refilling is not possible). The check valve is installed on output by usage of oil. _x000D_
Technical parameters:
- Reservoir capacity: 125, 250 ml
- Clearance period: 1, 2, 3, 4, 6, 8, 9, 10 and 12 month
- Lubricant: grease up to NLGI 2 or oil
- Temperature range: -10 °C up to +50 °C
- Max. pressure: 5 bar
- Output thread: R 1/4"(a)
For more information about automatic lubricators SKF TLSD see the catalogue attached. _x000D_
For other accessories see the general chapter Accessories for automatic lubricators with output thread R 1/4"(a).
Order data | Full units | ||
Plastic lubricant | Description | Full unit 125 | Full unit 250 |
LGWA 2 | Plastic bearing lubricant for high load, very high pressures, wide temperature range | TLSD 125/WA2 | TLSD 250/WA2 |
LGEM 2 | High viscous plastic bearing lubricant with solid additives | TLSD 125/EM2 | TLSD 250/EM2 |
LGHB 2 | High load, high temperature, high viscosity | TLSD 125/HB2 | TLSD 250/HB2 |
LGHP 2 | High efficiency, high temperature | TLSD 125/HP2 | TLSD 250/HP2 |
LGFP 2 | Approved for food-processing industry (NSF H1) | TLSD 125/FP2 | TLSD 250/FP2 |
LGWM 2 | High load, wide temperature range | TLSD 125C/WM2 * | TLSD 250C/WM2 * |
Oil for chains | |||
LHMT 68 | Oil for pro mean temperatures | TLSD 125/HMT68 | TLSD 250/HMT68 |
LHFP 150 | Oil approved for food-processing industry (NSF H1) | TLSD 125/HFP15 | TLSD 250/HFP15 |
* = Special versions for low temperatures |
Order data |
Plnicí sady | |||
Plastic lubricant | Popis | Plnicí sada 125 | Plnicí sada 250 |
LGWA 2 | Universal plastic lubricant with additives EP | LGWA 2/SD125 | LGWA 2/SD250 |
LGEM 2 | High load, low revolutions | LGEM 2/SD125 | LGEM 2/SD250 |
LGHB 2 | High temperatures, high load, sliding bearings | LGHB 2/SD125 | LGHB 2/SD250 |
LGHP 2 | Poly-urea for high efficiency | LGHP 2/SD125 | LGHP 2/SD250 |
LGFP 2 | Food-processing industry | LGFP 2/SD125 | LGFP 2/SD250 |
LGWM 2 | High load, wide temperature range | LGWM 2/SD125C * | LGWM 2/SD250C * |
Oil for chains | |||
LHMT 68 | Oil for mean temperatures | LHMT 68/SD125 | LHMT 68/SD250 |
LHHT 265 | Oil for high temperatures | LHHT 265/SD125 | LHHT 265/SD250 |
LHFP 150 | Oil approved for food-processing industry (NSF H1) | LHFP 150/SD125 | LHFP 150/SD250 |
* = Special versions for low temperatures |
Product filtering
Number of products found: 3



The listed prices are without VAT and apply to the quantity that is currently in stock