Drip feed oilers UNI
For connection to one lubrication point, with hand shut-off valve
It is possible to manually regulate the frequency of dosing the particular drops, or fully stop the process by regulation mechanism placed above the reservoir.
Technical parameters:
- Reservoir capacity: 10, 20, 36, 84, 140, 200, 500, 750, 1.000, 2.000, 3.000 ml
- Max. working temperature: 80 °C *)
- Material: stained brass, glass or plexi-glass reservoir, seals Perbunan (NBR) *)
- Output thread: R 1/8"(a), R 1/2"(a)/R 1/4"(i)
*) The drip feed lubricators with PTFE seals, by which it is possible in combination with glass reservoir to achieve the max. working temperature 200 °C available on request.
Generally about drip feed lubricators:
Drip feed lubricators are developed for dosing of oil, or other liquids, to one or more lubrication points.
Their function is based only on gravitation base that means that they are not able to exert any pressure, and it is necessary to place them above the lubrication point and only in position expressed in the pictures below.
All types of drip feed lubricators allows the opportunity of visual check of dosing of the particular drops through check window placed in the lower part of the oiler (by drip feed oilers for more lubrication points – in lower part of particular drippers).
Output (outputs) from drip feed lubricator is connected to lubrication point (points) directly, or through short pipes (plastic pipe, screwing, anchor material).
If it is necessary to spread the oil on the surface (e. g. by chains lubricating), the place with oil output will be equipped with lubrication brush (see accessories of automatic lubricators).
Product filtering
Number of products found: 25










The listed prices are without VAT and apply to the quantity that is currently in stock
Show on page
- 10
- 50
- 100
- 1
- 2
- …
- 3
- Next
Load 10 more