Shaft seals - special range

Type A-D with two sealing blades. Used to seal and separate two media.

Design with outer metal shell and reinforcement for increased rigidity. Ensures a precise and firm seat in the housing.

This type combines the AS type with an outer metal casing, additionally enhanced by an additional dust cover made of Polyurethane (PU), which serves to prevent the penetration of dirt from the outside during demanding applications.

Cartridge seals with high resistance to the penetration of dirt and dust from the outside. It places less stringent requirements on the roughness and surface hardness of the shaft.

Seals suitable for demanding applications in heavy engineering. Ideal for applications where shaft runout and higher circumferential speeds are encountered.

The standard type A inverted profile is attached to the inner diameter and serves to seal the outer diameter.

Closing metal cover with vulcanised rubber on the surface. Used for sealing technological openings.

Provides sufficient static tightness at the outer perimeter with the ability to eliminate temperature differential expansion in the housing.
At the same time, the metal part ensures that it is firmly fixed when axial loads occur.

Seals for hydraulic shock absorbers. Suitable for sealing axial movements in combination with the occurrence of higher overpressure.

Absorbs pressure pulsations well.

Special shaft seal for hydraulic forks. It is capable of sealing pressure pulsations when higher
eccentricity and higher impurity pressure from the external environment.

Shaft seal for hydraulic forks that acts as a wiper ring. Protects the inner seal from damage by dirt. Can also be produced in a version without tension spring.

Seals designed for power steering systems for vehicles. Different geometry of sealing lip and retaining ring made of POM material guarantees pressure resistance up to 140 bar.