Automatic self-cleaning filter AS70 / AS110 / AS175

Automatic self-cleaning filter for viscous media and very demanding applications.

The automatic filter AS 70 / AS 110 / AS 175 consists of the following parts

  • filter body and filter head
  • sieve (wedge wire element)
  • wiper blade
  • motor with spur gearbox

The filter medium enters through the lower inlet flange on the outside of the filter screen. From here it is pushed inwards through the screen, thereby filtering it. The cleaned media then flows into the upper part of the filter and then exits through the upper outlet flange. The solid particles are collected on the outside of the screen where they are continuously removed by a rotating wiper blade. The trapped sludge falls into the lower part of the filter body where it is discharged at regular intervals through the waste valve.

Sludge discharge can be achieved in three different ways

  • manually, by opening and closing the ball valve
  • Automatically - only with a time-controlled valve, without a control unit
  • or automatically based on DP depending on the pressure difference, i.e. including the control unit

Main filter functions

  • Environmentally friendly, no disposal of filter elements
  • minimisation of waste quantities
  • easy disassembly
  • filtration even during the washing cycle
  • Applicable to almost all liquids
  • robust construction, resistant to high DP

Application

  • paints, emulsion paints
  • inks
  • adhesives
  • gear oil, rapeseed oil, etc.
  • electrophoretic coatings
  • emulsions
  • electrophoretic coating
  • polyurethane
  • plasticizers
  • solvents
  • polyurethane coolants

Technical parameters of the AS70 / AS110 / AS175 filter

Filter head stainless steel 1.4571
Filter inner parts stainless steel 1.4571
Filter basket stainless steel 1.4435
Filter wiper blade stainless steel 1.4310
Viton PTFE o-ringseal
Filter fineness 25 - 2000 μm
Operating pressure 10 bar
Max. operating temperature 100 °C (with modification also 200 °C)
Drive motor with spur gearbox
Electrical connection requirements 400 V, 50 Hz
Protective housing IP65 or ATEX 1+2
Parameter AS 70 AS 110  AS 175
Flow rate 13 m³/h * 25 m³/h * 35 m³/h *
Inlet DN DN50 DN65  DN80
Outlet DN DN50 DN65  DN80
Waste DN R2" R2" R2"
Valve R1" R1" R1"
Filter - cap bolts  bolts  bolts 
Total length A (mm) 865 965 1030
Installation distance B (mm) 365 365 465
Filter diameter C (mm) 370 470 470
Inlet D (mm) 500 600  670
Outlet E (mm) 300 400 400
Dimension F (mm) 435 535 580
Dimension G (mm) 335 335 335
Volume (l) 10,5 12,5  22,5
Motor 400V, 50Hz (W)  95 95 95
Weight (kg) 41 47 81

* Values are for water, 100 µm sieve

Complies with 2014/68/EU, Article 4, paragraph 3