RO 300 l/hour
The state-of-the-art RO mini 300 reverse osmosis system is a fully automated continuous water treatment system that combines a microprocessor control unit with a clear digital display. Thanks to its innovative design, the plant delivers water of the highest quality that meets stringent standards while operating with minimal noise, even with its compact dimensions. The device is equipped with state-of-the-art membrane elements that achieve up to 99.6% efficiency, effectively eliminating bacteria, viruses and pyrogens. Optimized technology results in low operating costs and minimal energy consumption, eliminating the need for specialized personnel. In addition, the resulting water can be further treated by mixing permeate and pretreated water, reducing the overall cost of water production.
Key components and technologies
- Reverse membranes and tanks: Ensure high water treatment efficiency.
- Carbon candle filter: Removes suspended particles (5 micron filtration) and chlorine, thus contributing to clean and high quality water.
- High pressure pump: Contributes to the efficient operation of the entire system.
- Integrated instruments and sensors: Continuously monitor and regulate the operation, guaranteeing the stability and safety of the entire system.
Optional features and extensions
For an even wider range of applications, we offer the possibility of integrating optional features, including:
- Anti-scalant dosing or softening: Effectively prevents scale build-up on membranes.
- Pre-filtration systems: Possibility of interfacing with multimedia filters and activated carbon filters.
- pH adjustment: The device can be combined with pH neutralisation systems, calcite dissolvers, after-chlorination or dosing for pH adjustment.
- Pressurization kit: Allows direct operation in the pipeline.
Choose the RO mini 180 system and ensure reliable and economical water treatment with an emphasis on state-of-the-art technology and maximum quality.
Features of the unit
Advanced measurement and control:
Built-in inlet and permeate water conductivity meters
Permeate and waste flow measurement
Pressure gauges monitoring high pressure pump discharge and membrane waste
Safe and efficient operating elements
Low-pressure switch at the water inlet
Control valves for waste, recirculation and mixing of permeate with feed water
Intelligent control unit
Password protected menu access
Integrated timer that monitors the total number of operating hours and alerts when the activated carbon cartridge needs to be replaced
Long filter life
High-capacity activated carbon cartridge with a lifetime of up to 1,000 hours (depending on raw water characteristics and chlorine concentration)
High quality materials
All hydraulic components are made of corrosion-resistant materials that meet the most stringent drinking water standards
Technical specifications
The feed water for RO should meet the following specifications:
Model |
Flow rate* (l/hr) |
RO Membranes |
Recovery Ratio % |
Engine power (kW) |
Voltage (V/Hz/~) |
Connection (Input/Output) |
Dimensions (cm) |
Max pressure (bar) |
RO 180 | 180 | 1x4040 | 50 - 65 | 0,75 | 230V~ingle- phase ±10% 50Hz | G 1/2" | 55x40x150 | |
RO 300 | 300 | 2x4040 | 50 - 65 | 0,75 | G 1/2" | 55x40x150 | 10 |
The nominal permeate flow rate refers to the water produced by the membranes under the following conditions:
Features of the RO unit
Monitoring and control:
- Inlet and permeate water conductivity measurement
- Permeate and waste flow measurement
- Pressure gauges at high pressure pump discharge and membrane waste
Control and regulating elements:
- Low-pressure switch at the water inlet
- Control valves for waste, recirculation and mixing of permeate with feed water
Intelligent control unit:
- Password protected menu access
- Integrated timer to monitor the total number of operating hours with warning when the activated carbon cartridge needs to be replaced
High-capacity activated carbon candle:
- Up to 1,000 hours of operation (depending on raw water characteristics and chlorine concentration)
Quality materials:
- All hydraulic components are made of corrosion-resistant materials suitable for drinking water