System Microspray
SKF TLSD (SYSTEM 24) grease bushings from the SKF MaPro program work on the electromagnetic principle. _x000D_
They are a direct replacement of SKF LAGE automatic lubricators which production has been finished and only spare packages are available for them (these are containers with grease and batteries)._x000D_
The emptying period of TLSD lubricators can be precisely set - 1, 2, 3, 4, 6, 8, 9, 10 and 12 months. The lubrication bushing can be removed at any time. _x000D_
The lubrication sleeve is intended for direct connection to the thread of the lubrication point. A short line can be installed between the outlet from the throat and the lubrication point (a maximum length of 0.5 m is recommended, if the inner diameter of the pipes used is d10 mm)._x000D_
Lubricators are supplied with 125 and 250 ml tanks pre-filled with grease or SKF oil (wide portfolio of grease types). The container cannot be refilled. _x000D_
When using oil, it is recommended to install a check valve at the outlet of the lubrication case._x000D_
Technical parameters:
Container volume: 125, 250 ml
Applicable grease: grease up to NLGI 2 or oil
Working temperature range: -10 °C to +50 °C
Adjustable emptying time: 1, 2, 3, 4, 6, 8, 9, 10 and 12 months
Max. pressure: 5 bar
Outlet thread: R 1/4"(a)
More information about SKF TLSD automatic lubrication bushings can be found in the catalog. _x000D_
Other accessories can be found among the general accessories for automatic lubrication bushings with outlet thread R 1/4"(m).
SKF TLSD (SYSTEM 24) grease bushings from the SKF MaPro program work on the electromagnetic principle. _x000D_
They are a direct replacement of SKF LAGE automatic lubricators which production has been finished and only spare packages are available for them (these are containers with grease and batteries)._x000D_
The emptying period of TLSD lubricators can be precisely set - 1, 2, 3, 4, 6, 8, 9, 10 and 12 months. The lubrication bushing can be removed at any time. _x000D_
The lubrication sleeve is intended for direct connection to the thread of the lubrication point. A short line can be installed between the outlet from the throat and the lubrication point (a maximum length of 0.5 m is recommended, if the inner diameter of the pipes used is d10 mm)._x000D_
Lubricators are supplied with 125 and 250 ml tanks pre-filled with grease or SKF oil (wide portfolio of grease types). The container cannot be refilled. _x000D_
When using oil, it is recommended to install a check valve at the outlet of the lubrication case._x000D_
Technical parameters:
Container volume: 125, 250 ml
Applicable grease: grease up to NLGI 2 or oil
Working temperature range: -10 °C to +50 °C
Adjustable emptying time: 1, 2, 3, 4, 6, 8, 9, 10 and 12 months
Max. pressure: 5 bar
Outlet thread: R 1/4"(a)
More information about SKF TLSD automatic lubrication bushings can be found in the catalog. _x000D_
Other accessories can be found among the general accessories for automatic lubrication bushings with outlet thread R 1/4"(m).
