K 730
DESCRIPTION
K 730 is designed as seal for one-part piston for the heaviest loads. This seal can be used for double-acting or single-acting applications. Type K 730 consists of TPE sliding ring which has a excellent wear resistance and from rubber pre-load ring. Acetal back-up rings are used on both sides.
Combining design and material provide these positive properties:
- long lifetime
- one-part piston construction
- piston under pressure is without leakage
- good gap bridging
- excellent wear resistance
- dirt resistance
- easy assembly
These seals are designed mainly for roof supports in mining. K 730 are manufactured with an bigger preload and therefore are suitable for low speeds.
MEDIA
This seal is suitable to run in liquids based on mineral oil from -40°C to +100°C. The temperature range to +60°C is allowed for water, pressure liquids HFA and HFB. Special materials are available for hard-flamable liquids.
NOTE
The back-up rings have cross-section shaped "L" in some dimensions.
| Operating conditions | ||
|---|---|---|
| Maximum pressure | ||
| ´v´max. | Temperature range | Temperature range |
| m/s | 0°C / +60°C | -40°C / +100°C |
| 0.3 | 400 bar | 315 bar |
| 0.15 | 700 bar | 500 bar |
| static | 1200 bar | 700 bar |
Product filtering
Number of products found: 87
Show on page
- 10
- 50
- 100
- 1
- 2
- …
- 9
- Next
Load 10 more
